• Kyiv
    • Kyiv
    • Crimea
    • Odessa
    • Ternopil
    • Lviv
    • Dnepropetrovsk
    • Lugansk
    • Russia
    • Krasnodar
    • Belarus
    • Moldova
  • Mobile
  • Callback
+380 44 545-71-04multichannel phone/fax
+380 93 426-37-10
+380 67 445-45-98
+380 50 440-01-74
Your phone has been successfully sent.
You'll be contacted soon.
+7 978 797-58-57
+380 48 700-32-30
+380 35 252-18-35
+380 63 681-40-21
+380 562 32-28-16
+380 642 71-78-73
+7 495 975-98-73
+375 29 103-13-15
+373 022 28-19-66
+7 861 203-40-65

Water heaters & Storage tanks

T Series Single CoilHeat accumulator is a steel reservoir of cylindrical shape, which accumulates and stores the hot water. The available heat accumulator minimizes the loss of heat energy and significantly reduces the energy consumption; such accumulator is an integral part in modern complex heating system and has the economical benefit in itself. Depending on modification, the heat accumulators may function together with solar collectors, solid fuel boilers, gas boilers, heat pumps, electric heaters and other energy sources. You can connect some such sources to the heat accumulator at the same time.

It is recommended to use the tanks-heat accumulators with volumes from 300 to 2,000 l in systems with natural and forced circulation. Such accumulating reservoir of the simplest configuration is a steel vertical tank, which height by 3-5 times exceeds its diameter. Thus, the thermal stratification of water is provided and the efficiency in use of tank-heat accumulator is improved.

Related files:

Эмалированные баки из Польши

Enameled tanks ATMOSFERA (Poland)

The enameled tanks ATMOSFERA of Polish production with volumes of 200 or 300 liters are furnished with one or two heat exchangers. The high heating capacity is achieved thanks to use of spiral heat exchanger (coil) with large heating surface.

European energy efficiency class B

The long shelf life is achieved thanks to use of anode and porcelain enamel, baked at temperature of 850°C. The insulation is from polyurethane foam. The soft outside skin is made of skay-type material. Orange color.

Related files:

atmosfera_a

Tank ATMOSFERA A (Turkey)

This series of tanks distinguishes itself with available control unit, as well as absence of heat exchangers. The control unit is furnished with temperature sensors for convenient system monitoring, magnesium anode status sensor, which will indicate the necessity to replace the anode, as well as electric heater to provide with warranted water heating. The tanks of series A have the double layer enameled coating and can be used both in heating systems and hot water systems.

Related files:

Icon of Баки-накопители Атмосфера A Баки-накопители Атмосфера A
[187.5 KB, Ver., Скачано: 1491 раз(а)]

atmosfera_trm

Tanks ATMOSFERA TRM (Turkey)

This series distinguishes itself with available one or two heat exchangers and absence of control unit that significantly reduces the cost of tank and enables furnishing it with any other equipment. The tanks of series TRM have the double layer enameled coating and can be used in heating systems, hot water systems, with solar systems, as well as any other heating sources.

Related files:

Icon of Баки-накопители Атмосфера TRM Баки-накопители Атмосфера TRM
[154.2 KB, Ver.23.03.2016, Скачано: 2355 раз(а)]

atmosfera_g

Tanks ATMOSFERA G (Turkey)

The series of accumulating tanks is furnished with one or two heat exchangers and control unit. The control unit is furnished with temperature sensors for convenient system monitoring, magnesium anode status sensor, which will indicate the necessity to replace the anode, as well as electric heater. The tanks of series G have the double layer enameled coating and can be used in heating systems, hot water systems, with solar systems, as well as any other heating sources.

Related files:

Icon of Баки-накопители Атмосфера G Баки-накопители Атмосфера G
[299.9 KB, Ver., Скачано: 1645 раз(а)]

Tanks-accumulators Atmosfera® (Ukraine)

баки Атмосфера-УкраинаATMOSFERA manufactures its own model range of tanks-accumulators at Ukrainian enterprises under its own trademark and production control. The model range of Ukrainian heat accumulators ATMOSFERA includes 6 series of tanks with the volume from 350 liters to 10 tons, designed for utility and municipal heating and hot water systems. The variety of models for tanks ATMOSFERA allows using them in systems of any configuration and any purpose – from utility solar thermal hot water systems to heating and hot water systems with traditional heating sources.

All accumulators ATMOSFERA of Ukrainian production have the efficient soft heat insulation from polyurethane foam. The tanks ATMOSFERA-Ukraine distinguish themselves with constantly high quality and reasonable price.

Related files:

Icon of Баки Атмосфера-Украина Баки Атмосфера-Украина
[288.8 KB, Ver.23.03.2016, Скачано: 3475 раз(а)]

Пром

Tanks-accumulators Atmosfera of series Prom (Ukraine)

The industrial series of enameled tanks Atmosfera Prom includes the models with capacity from 1,000 to 10,000 liters and is specially designed for water heating and heat accumulation in different heating and hot water systems. These tanks have no integrated heat exchangers, while the available one or three flanges allow installing the built-in heat exchanges into tanks-accumulators of series Prom. Besides, the flanges may also be used for revision or cleaning. The inner surface of tanks Atmosfera Promo is covered with German polymer porcelain enamel. The tanks may operate under excessive pressure of up to 0.6 MPa with maximum operating temperature of 100°C. The soft foam polyurethane thermal insulation with 10 cm thick efficiently keeps the heat. The skin is made of artificial leather (enameled cloth).

Эмаль

Tanks-accumulators Atmosfera of series Enamel (Ukraine)

The series of tanks Atmosfera Enamel with polymer ceramic coating of the inner wall is first of all designed for use in hot water systems. The accumulators of series Enamel may additionally be furnished with one or two heat exchangers from corrugated stainless steel AISI 304 with 0.3 mm thick. Two magnesium anodes 19×210 are built into the tanks for additional protection against corrosion. The tanks Atmosfera Enamel are furnished with revision flanges for cleaning and other scheduled maintenance during operation. The tanks Atmosfera Enamel are ideal for use in utility solar systems.

The tanks of series Enamel may operate under excessive pressure of inner liquid – transfer medium up to 0.6 MPa. The maximum operating temperature is 100°C. The thermal insulation is made from soft foam polyurethane with 60 cm thick. The skin is made of artificial leather (enameled cloth). All connecting fittings have the female thread.

Эмаль-НТ Эмаль-2Т

БН

Tanks-accumulators Atmosfera of series BN (Ukraine)

The tanks of series BN include the buffer reservoirs from carbon steel without inner coating. The tanks-accumulators Atmosfera BN are primarily used to heat accumulation in heating systems or may be applied for hot water supply through one or two heat exchangers from carbon steel, or additional external heat exchangers.

The tanks of series BN may operate under excessive pressure of inner liquid – transfer medium up to 0.3 MPa. The maximum operating temperature is 100°C. The thermal insulation is made from soft foam polyurethane with 100 cm thick. The skin is made of artificial leather (enameled cloth). All connecting fittings have the female thread.

БН-ВТБН-НТБН-2Т

ПН

Tanks-accumulators Atmosfera of series PN (Ukraine)

The tanks-accumulators of series PN from carbon steel is furnished with circulating upper heat exchanger from corrugated stainless steel AISI-304 with 0.3 mm thick and diameters of 25, 32 or 40 mm for hot water supply. The tanks Atmosfera PN may also have the additional built-in lower heat exchanger from carbon steel for connection of low temperature heat source, such as solar collector.

The tanks of series PN may operate under excessive pressure of inner liquid – transfer medium up to 0.3 MPa. The maximum operating temperature is 100°C. The thermal insulation is made from soft foam polyurethane with 100 cm thick. The skin is made of artificial leather (enameled cloth). All connecting fittings have the female thread.

ПН-2Т

ББ

Tanks-accumulators Atmosfera of series BB (Ukraine)

The series BB (tank in tank) includes the models of accumulating reservoirs from carbon steel without inner coating with built-in tanks from stainless chrome nickel steel AISI-304 for hot water supply. The inner boiler is equipped with magnesium anode for protection against scale. The tanks Atmosfera BB may also have one or two heat exchangers of direct heating from carbon steel.

The tanks of series BB may operate under excessive pressure of inner liquid – transfer medium up to 0.3 MPa. The maximum operating temperature is 100°C. The thermal insulation is made from soft foam polyurethane with 100 cm thick. The skin is made of artificial leather (enameled cloth). All connecting fittings have the female thread.

ББ-ВТББ-НТББ-2Т

Атмосфера-Україна © 2003-2017